Digitus Mounting Kit for 482.6 mm (19") and 254 mm (10") Components, M6
User-friendly and quick installation of components in network or server cabinets.
- 50 screws, cage nuts, and washers - Standard size M6 - Compatible with all standard 19-inch or 10-inch perforated panels - PZ screw head - Silver screw, black washer - Ready to use right away: Shipped loose in a cardboard box
The DIGITUS® mounting kit consists of 50 M6 screws, cage nuts, and washers. Your equipment can be easily and securely mounted in a network or server cabinet. Thanks to the convenient snap-in method, the cage nuts can be quickly attached to the 19" rail. The PZ (Pozidriv) screw head ensures user-friendly operation.
Digitus Slide rails for 482.6 mm (19") network enclosures
For supporting heavy built-in components, such as UPS systems or servers. Infinitely variable depth and suitable for 19" installation.
- Easy installation in the 19" level without cage nuts thanks to threaded holes. - For DIGITUS® network cabinets Unique, Unique Light with 600 mm or 800 mm external depth. - Infinitely variable depth: 350 mm to 600 mm - Load capacity: 100 kg
The slide rails are used to support heavy installations in DIGITUS® network enclosures of the Unique & Unique Light series. They are attached to the front and rear 482.6 mm 19" profile rails. Made of galvanized sheet steel and loadable up to 100 kg. The rails are infinitely variable in depth to adapt to individual spacing in the 19" plane.
The perfect light source for your enclosure. Can be installed horizontally or vertically. Thanks to its magnetic mounting, it’s versatile and can be used in a wide range of applications—not just in network or server cabinets.
- Energy- and cost-saving - Maximum brightness without a warm-up period - Long service life - Energy efficiency class: F - Two different modes: Automatic door mode ("Automatic Mode") or touch mode ("ON/OFF Mode") - No heat generation - Compact design and flexible use via magnetic strip (285 mm) - M2.5 screws included for an alternative mounting option
Thanks to its compact design and magnetic mounting, the LED light is highly versatile. It can be installed anywhere in your 482.6 mm (19") enclosure, where it provides optimal lighting via high-performance LEDs that deliver maximum brightness immediately, without a warm-up period. The two different modes (selectable via a switch) offer particularly user-friendly operation. Automatic mode ensures that the LED cabinet lighting turns on automatically via the sensor as soon as you open the door of your 482.6 mm (19") enclosure, and turns off again as soon as you close it. Alternatively, the ON/OFF mode can be used for manual activation and deactivation. Move your finger or hand in front of the sensor to turn the light on and off. The power adapter is included, so the DIGITUS® LED light is ready to use right out of the box.
Digitus aluminum outlet strip with switch, 7 safety outlets, 2 m supply with surge protection
Safe and professional power supply in the 19" range
- Perfect power distribution for your network and IT rack - Integrated overvoltage protection protects connected loads from overvoltage. - Sockets are rotated by 45° for optimum space management and easy access - Compact design, 19" 1U housing
The DIGITUS® power strips are the perfect solution for your network or server cabinet. In terms of power distribution, the PDU meets the requirements of many applications in IT, network technology, laboratories and the home. The socket strip can be mounted in the 19" area of the cabinet in a space-saving 1U. Overvoltage protection protects consumers from overvoltage. The integrated switch is fitted with a cover to prevent the socket strip from being switched off unintentionally.
Digitus aluminum outlet strip with pre-fuse, 8 safety outlets, 2 m supply IEC C14 plug
Safe and professional power supply in the 482.6 mm (19") range
- Perfect power source for your 482.6 mm (19") enclosure - Sockets are rotated by 45° for optimum space management and easy access
The DIGITUS® power strips are the perfect solution for your 482.6 mm (19") network or server cabinet. Optimized for cabinet mounting, the DIGITUS® power strips with 220-240V at 50-60 Hz offer you the best performance with a suitable load. The 482.6 mm (19") mounting material supplied ensures optimum attachment to the profile rails of your cabinets. Each socket strip can be mounted horizontally or vertically and, depending on the cabinet type, it is possible to mount the socket strip with the taps facing upwards or downwards.
Digitus Power strip with aluminum profile and integrated circuit breaker, 18-way protective contact socket outlet
- Perfect power distribution for your network and IT rack - Automatic circuit breaker against overload and short circuit - Sockets are rotated by 45° for optimum space management and easy access - Protects cables and wires by rapid disconnection in the event of a short circuit and defined delayed disconnection in the event of an overload
The DIGITUS® power strips are the perfect solution for your network or server cabinet. In terms of power distribution, the PDU meets the requirements of many applications in IT, network technology, laboratories and the home. The power strip can be mounted vertically. Depending on the type of cabinet, it is possible to mount the socket strip with the taps pointing to the right or left.
Digitus Shelf with Variable Rails for Fixed Mounting in 483 mm (19") Cabinets
- Variable fastening rails ensure optimal hold in the 483 mm (19”) profile
The shelves for fixed mounting can be installed easy on the four 483 mm (19“) profile rails of your 483 mm (19“) network- or server cabinet. Due to their stable, perforated steel sheet with a load capacity of 50 kg, they are the optimal surface for components which are not 483 mm (19”) suitable. The fixing rails are can be adjusted if needed.
Digitus Extendible Shelf for fixed mounting on front 483 mm (19") profile rails
Due to its compact construction it is perfectly suitable also for 483 mm (19”) wall mounting cabinets with a depth from 450 mm.
- extendible, with handle - Fixed installation only on the front 483 mm (19") profile rails - due to this it is perfectly suitable for double sectioned wall mounting cabinets
The shelf for fixed mounting is easy to install on the front 483 mm (19“) profile rails of your 483 mm (19“) network- or server cabinet. Due to its compact construction it is perfectly suitable also for 483 mm (19”) wall mounting cabinets with a depth from 450 mm. The shelf is extendible via handle which makes the access easier. Due to its stable, perforated steel sheet with a load capacity of 30 kg, it is the optimal surface for components which are not 483 mm (19”) suitable.
Digitus Shelf with Variable Rails for Fixed Mounting in 483 mm (19") Cabinets
- Variable fastening rail: 350 mm to 550 mm in depth - Variable fastening rails ensure optimal hold in the 483 mm (19”) profile
The shelves for fixed mounting can be installed easy on the four 483 mm (19“) profile rails of your 483 mm (19“) network- or server cabinet. Due to their stable, perforated steel sheet with a load capacity of 50 kg, they are the optimal surface for components which are not 483 mm (19”) suitable. The fixing rails are can be adjusted if needed.
Digitus Leveling feet for 482.6 mm (19") network and server enclosures
- Easy installation under the 482.6 mm (19") network or server cabinet - Converts the 482.6 mm (19") wall-mounted enclosures of the Unique series into free-standing network enclosures - Set = 4 pieces
The leveling feet are supplied in a set of 4 pieces including mounting material and are therefore ready for immediate use. The robust PVC feet can be easily attached to the base of the DIGITUS network and server cabinets using the M10 thread. They are suitable for all freestanding 482.6 mm 19" cabinets of the Unique, Unique Light and Unique Server-N series as well as the 482.6 mm 19" wall-mounted enclosures of the Unique series.
Digitus Ventilators for use in ventilator units for network and server cabinets
This DIGITUS® 483 mm (19”) accessory was developed for the demanding requirements placed on IT infrastructure and manufactured according to German quality standards.
- Serves as replacement ventilator for ventilator units from DIGITUS® - Can alternatively be commissioned as an individual ventilator
The individual ventilator from DIGITUS® serves as replacements to exchange with existing ventilator units from DIGITUS® for network and server cabinets. Alternatively, the ventilator can also be individually wired and commissioned. For example, it can serve as an extension to the DIGITUS® wall mounting cabinets for outdoor areas (e.g.: DN-19 12-U-I-OD) in which it can simply be snapped in on the inside in front of the existing filter.
Digitus Key for Unique and SOHO Pro series wall-mounted enclosures
- Spare key
Key for Unique wall-mounted enclosures (e.g. DN-19 12-U) and SOHO Pro (e.g. DN-49200). Also suitable for the SOHO Slim enclosure (DN-19 04U-PB) and free-standing Unique server enclosures (e.g. DN-19 SRV-26U-1) & free-standing Dynamic enclosures (e.g. DN-19 42U-8/8-D).
Digitus Cable management bracket for 482.6 mm (19") network and server enclosures
Complete set of cable management brackets and mounting screws for flexible cable management.
- The cable management brackets keep your 482.6 mm (19") network or server enclosure tidy. - Make structured cabling flexible. - Angled opening for easy cable entry. - Robust sheet steel with powder coating in gray (RAL 7035) to match the network or server enclosure. - Set of 10 cable management brackets incl. mounting material
The cable management brackets keep your 482.6 mm (19") network or server enclosure tidy. The robust sheet steel construction offers a flexible and optimum solution for structured cabling. The scope of delivery includes 10 cable routing rings and the required fastening material.
Digitus Cable Management Panel with Brush Entries for 483 mm (19") Cabinets, 1U
- Easy installation - Optimized cable management possibilities due to cable rings and additional openings with brushes
The Cable Management Panel is getting fixed on the 483 mm (19”) profile rails. Four cable guiding rings and three cable entries with brush allow an easy, horizontal array of patch cords. It guarantees an optimized cable management in your 483 mm (19”) network- or server rack.
Digitus Cable brush strip for 483 mm (19") cabinets
- Enables orderly cable routing within the 483 mm (19") network or server enclosure - 27x423 mm opening with brushes to protect the cables from damage - Slim design that only takes up 1 height unit - Ready for immediate use: Fastening material is supplied (cage nuts, screws, washers)
The 1U cable brush strips are attached to the 483 mm (19") profile rails. Integrated brushes protect the routed cables from damage. They are therefore particularly easy to lay in the rear or side of the enclosure to optimize cable management in your network or server enclosure.
Hook & Loop Tape, 20 mm width, 10 m roll, color black
- Structure your cabling in an easy and efficient way - The tape fits close and regularly and doesn't put too much pressure on the cable - perfect for sensitive installations - Re-usable
With the DIGITUS® Hook and loop tape for structured cabling you will reduce the chaos with your cabling inside of your cabinets. The tape provides an optimized support for your cables with its 20 mm width and the perfect adhesive material. The overall length of 10 m per roll leaves a big scope for use. Whether full cable harness in the panel of your DIGITUS® Network- or Server Cabinet or paired versions of patch cables; with the DIGITUS® Hook and loop tape your ensure a perfect cohesion. The multiple usable tape fits close and regularly and doesn't put too much pressure on the cables, so it fits for sensitive installations.
Digitus Cable Management Panel with Brush Strip for 483 mm (19") Cabinets, 1U
- Easy installation - Brush strip and cable tray for perfect cable management
The Cable Management Panel is getting fixed on the 483 mm (19”) profile rails. The opening is outfitted with a brush strip which prevents the damage of inserted cables. A rear cable tray with fixing points for up to 24 cables rounds off the design and makes an optimized cable management in your 483 mm (19”) network- or server cabinet possible.
Digitus Cable Management Panel with Cable Rings for 483 mm (19") Cabinets, 2U
- Easy installation
The Cable Management Panel is getting fixed on the 483 mm (19“) profile rails. Five cable guiding rings allow an easy, horizontal array of patch cables. It guarantees an optimized cable management in your 483 mm (19”) network- or server rack.
Digitus Cable Management Panel with detachable cover for 483 mm (19“) cabinets, 1U
- Easy installation
The Cable Management Panel is getting fixed on the 483 mm (19“) profile rails. A detachable rear plate makes to access to cables easier. An optimized cable management in your 483 mm (19”) network- or server cabinet is guaranteed.
Digitus Cable management bracket for 482.6 mm (19") network and server enclosures
Complete set of cable management brackets and mounting screws for flexible cable management.
- The cable management brackets keep your 482.6 mm (19") network or server enclosure tidy. - Make structured cabling flexible. - Compact design that requires only about one height unit (1U). - Angled opening for easy cable entry. - Robust sheet steel with powder coating in gray (RAL 7035) to match the network or server enclosure. - Set of 10 cable management brackets incl. mounting material
The cable management brackets keep your 482.6 mm (19") network or server enclosure tidy. The robust sheet steel construction offers a flexible and optimum solution for structured cabling. The scope of delivery includes 10 cable routing rings and the required fastening material.
483 mm (19”) profiles connected to the main frame with depth bars from 3 points left and right each
Complete metal frame front door with 4 mm tempered safety glass
Heavy duty uprights, extra bended for high load capacities and to assemble cable management rings
270° door opening angle
Equipment mounting depth min.-max.: 290-770 mm
Reinforced main frame structure due to injected aluminum corner joints which give extra stability
Safety class rating IP20
483 mm (19”) profiles adjustable in depth and with height unit marking
Load capacity of 483 mm (19”) profile rails: 1200 kg
Roof and base with changeable 483 mm (19”) blank panels allowing any 483 mm (19”) assembly
Side panels are lockable and removable
Rack is completely mounted
Several earthing points for, earthing leads are pluggable (Faston connector)
Top and base frames with closed profile material for maximum stability
Double wing opening rear door
incl. 4 pieces of leveling feet already pre-configured under the rack
Special lock system with pivot lever, ready for profile half cylinder on front- and rear doors
483 mm (19”) profiles mounted on the front the rear side of the cabinet, galvanized
With vertical cable management ducts in the front
Description
The varioFLEX cabinets are made for high demand IT-Infrastructure solutions - designed and developed on highest standard for maximum stability and flexibility.
- Maximum stability and flexibility - High load capacity of 483 mm (19") profile rails of up to 1200 kg - Very modular design with changeable 483 mm (19") blank panels in roof and base
The new varioFLEX cabinets are designed and produced for cabling and networking components. Our planners and designers came together to create a special 19” cabinet range never seen before. Due to specific optimizations, the varioFLEX series offers maximum stability and flexibility for every need. The front door consists of a complete metal frame with 4 mm tempered safety glass, reinforced with metal fixings which give extra stability. Server cabinets are equipped with 70% perforated front and rear doors. A special lock system is present on front as well as rear doors. Cabinets with 800 mm width are equipped with a double opening back door incl. 3-point locking mechanism. 270° door opening angle ensures best accessibility at all times. All side panels are lockable and equipped with two pieces of snap latches each, for easy removing. Every cabinet is equipped with galvanized 19” profiles mounted on the front and rear side, which are connected to the main frame on depth bars from three points left and right each. They are adjustable in depth and with height unit marking. The roof as well as the bottom is equipped with 19” dimensions blank panels (4U + 8U = total access of 12U)which allow any 19” assembly and are easy to change with other accessories like vented panels, brushed panels, sliding entry panels, etc. Cabinets with 800 mm width are outfitted with brushed cable entries all the way of depth on the left and right sides of top and bottom. Furthermore the 800 mm width cabinets from 32U are pre-configured with vertical cable management panels with a special fixing unit to the main frame, separated from the 19” profiles. Overall the main frame of varioFLEX cabinets is reinforced due to injected aluminum corner joints which give extra stability. Moreover they have heavy duty uprights, extra bended for high load capacities and the availability to assemble cable management rings.
Specifications
About this item
About this item
Item No.
273630
EAN
4016032371243
Manufacturer No.
DN-19 42U-8/10-V
Specs
No matching specifications found.
Features
Back door construction
Steel
Front door construction
Glass
International Protection (IP) code
IP20
Type
Freestanding rack
Product colour
Grey
Maximum weight capacity
1200 kg
Rack capacity
42U
Side panels included
Yes
Weight & dimensions
Size (imperial)
48.3 cm (19")
Width
800 mm
Depth
1000 mm
Height
2031 mm
Packaging data
Package weight
151 kg
Package width
850 mm
Package depth
1050 mm
Package volume
1857290 cm³
Logistics data
Country of origin
Turkey
Harmonized System (HS) code
85381000
UK Trade Tariff code
94032080
Manufacturer Information
GPSR - Product Safety Information
The economic operator based in the EU is responsible for this product
Eine ggf. ausgeschriebene/inbegriffene Garantie/Herstellergarantie wird durch den Hersteller des Produktes gewährt. Die Garantieleistung des Herstellers erstreckt sich räumlich mindestens auf das Land Deutschland. Inbegriffen sind mindestens alle Mängel die innerhalb der Garantiezeit entstehen und nicht von Ihnen verursacht wurden. Die Garantiebedingungen und Kontaktdaten samt der Erfordernisse für die Geltendmachung der Garantie sind auf den Internetseiten der jeweiligen Hersteller einsehbar. Für das aktuelle Produkt finden Sie diese Informationen unter folgendem Link: (www.apple.de). Bitte wenden Sie sich zur Abwicklung der Herstellergarantie an den Garantiegeber. Die gesetzlichen Mängelrechte (Gewährleistungspflicht) gemäß den §§ 437ff. BGB (Nacherfüllung, Rücktritt, Minderung und Schadensersatz) von 24 Monaten werden durch eine zusätzliche Herstellergarantie nicht eingeschränkt. Bei Fragen zu den genauen Bedingungen der Herstellergarantie Ihres Produktes wenden Sie sich bitte an shop2go@continue.de.
General product descriptions contained in brochures, magazines, price lists, on the internet, or in other publications do not constitute an agreement regarding product characteristics or a warranty. This applies in particular to the appearance, dimensions, and weights of the goods. It also applies to specified performance data, insofar as these do not determine suitability for the intended or ordinary use.
Schneller Versand
In 1-3 Werktagen bei Ihnen. Kostenlos ab 50 €.
Sichere Zahlung
SSL-verschlüsselte Datenübertragung. Kauf auf Rechnung, PayPal & Kreditkarte.