Digitus Ventilators for use in ventilator units for network and server cabinets
This DIGITUS® 483 mm (19”) accessory was developed for the demanding requirements placed on IT infrastructure and manufactured according to German quality standards.
- Serves as replacement ventilator for ventilator units from DIGITUS® - Can alternatively be commissioned as an individual ventilator
The individual ventilator from DIGITUS® serves as replacements to exchange with existing ventilator units from DIGITUS® for network and server cabinets. Alternatively, the ventilator can also be individually wired and commissioned. For example, it can serve as an extension to the DIGITUS® wall mounting cabinets for outdoor areas (e.g.: DN-19 12-U-I-OD) in which it can simply be snapped in on the inside in front of the existing filter.
The perfect light source for your enclosure. Can be installed horizontally or vertically. Thanks to its magnetic mounting, it’s versatile and can be used in a wide range of applications—not just in network or server cabinets.
- Energy- and cost-saving - Maximum brightness without a warm-up period - Long service life - Energy efficiency class: F - Two different modes: Automatic door mode ("Automatic Mode") or touch mode ("ON/OFF Mode") - No heat generation - Compact design and flexible use via magnetic strip (285 mm) - M2.5 screws included for an alternative mounting option
Thanks to its compact design and magnetic mounting, the LED light is highly versatile. It can be installed anywhere in your 482.6 mm (19") enclosure, where it provides optimal lighting via high-performance LEDs that deliver maximum brightness immediately, without a warm-up period. The two different modes (selectable via a switch) offer particularly user-friendly operation. Automatic mode ensures that the LED cabinet lighting turns on automatically via the sensor as soon as you open the door of your 482.6 mm (19") enclosure, and turns off again as soon as you close it. Alternatively, the ON/OFF mode can be used for manual activation and deactivation. Move your finger or hand in front of the sensor to turn the light on and off. The power adapter is included, so the DIGITUS® LED light is ready to use right out of the box.
Digitus aluminum outlet strip with switch, 7 safety outlets, 2 m supply with surge protection
Safe and professional power supply in the 19" range
- Perfect power distribution for your network and IT rack - Integrated overvoltage protection protects connected loads from overvoltage. - Sockets are rotated by 45° for optimum space management and easy access - Compact design, 19" 1U housing
The DIGITUS® power strips are the perfect solution for your network or server cabinet. In terms of power distribution, the PDU meets the requirements of many applications in IT, network technology, laboratories and the home. The socket strip can be mounted in the 19" area of the cabinet in a space-saving 1U. Overvoltage protection protects consumers from overvoltage. The integrated switch is fitted with a cover to prevent the socket strip from being switched off unintentionally.
Digitus Cable Management Panel with detachable cover for 483 mm (19“) cabinets, 1U
- Easy installation
The Cable Management Panel is getting fixed on the 483 mm (19“) profile rails. A detachable rear plate makes to access to cables easier. An optimized cable management in your 483 mm (19”) network- or server cabinet is guaranteed.
Digitus Cable Management Panel with Cable Rings for 483 mm (19") Cabinets, 2U
- Easy installation
The Cable Management Panel is getting fixed on the 483 mm (19“) profile rails. Five cable guiding rings allow an easy, horizontal array of patch cables. It guarantees an optimized cable management in your 483 mm (19”) network- or server rack.
Digitus Cable Management Panel with Brush Strip for 483 mm (19") Cabinets, 1U
- Easy installation - Brush strip and cable tray for perfect cable management
The Cable Management Panel is getting fixed on the 483 mm (19”) profile rails. The opening is outfitted with a brush strip which prevents the damage of inserted cables. A rear cable tray with fixing points for up to 24 cables rounds off the design and makes an optimized cable management in your 483 mm (19”) network- or server cabinet possible.
Digitus Cable management bracket for 482.6 mm (19") network and server enclosures
Complete set of cable management brackets and mounting screws for flexible cable management.
- The cable management brackets keep your 482.6 mm (19") network or server enclosure tidy. - Make structured cabling flexible. - Compact design that requires only about one height unit (1U). - Angled opening for easy cable entry. - Robust sheet steel with powder coating in gray (RAL 7035) to match the network or server enclosure. - Set of 10 cable management brackets incl. mounting material
The cable management brackets keep your 482.6 mm (19") network or server enclosure tidy. The robust sheet steel construction offers a flexible and optimum solution for structured cabling. The scope of delivery includes 10 cable routing rings and the required fastening material.
Digitus Roof-mounted fan unit for 483 mm (19") wall-mounted housing
The DIGITUS® 483 mm (19") accessories have been developed for the high demands of IT infrastructure and are manufactured to German quality standards.
- Simple installation in the roof module of the 19" wall-mounted housing - The waste heat from the built-in components is actively dissipated upwards via the fan unit - Two built-in fans - Includes adjustable thermostat and ON/OFF switch
The roof-mounted fan units are suitable for all wall-mounted enclosures in the Unique & Dynamic series and for outdoor wall-mounted enclosures. Installation in the roof module of the enclosure can be carried out quickly and easily in just a few steps. Equipped with an ON/OFF switch and a shelf-mounted thermostat, each fan unit offers the best operational readiness according to individual requirements. The model is available in the standard colors grey (RAL 7035) and black (RAL 9005) and is equipped with two fans.
Digitus Fan unit for variable 483 mm (19") installation
DIGITUS® 483 mm (19") accessories are designed to meet the high demands of IT infrastructure and are manufactured to German quality standards.
- Variable installation in the 483 mm (19") level - The waste heat from the built-in components is actively dissipated via the fan unit - Two built-in fans - Includes adjustable thermostat and ON/OFF switch
Also known colloquially as slide-in fans, the fan units can be mounted variably in the 19" grid of any network or server rack instead of under the roof. The scope of delivery includes mounting brackets for easy attachment in the 19" profile. Equipped with an ON/OFF switch and a shelf-mounted thermostat, each fan unit offers the best operational readiness according to individual requirements. The model is available in the standard colors grey (RAL 7035) and black (RAL 9005), optionally equipped with two or four fans.
Digitus Blank cover for 482.6 mm (19") network and server enclosures
Practical option for air routing and covering otherwise unused height units.
- Modular blanking plate - To improve air circulation in the network and server enclosure - Simple installation in the 482.6 mm (19") profile - Practical option for covering otherwise unused height units in the 482.6 mm (19") profile
The blind covers are suitable for all 482.6 mm 19-inch profile rails in your network or server enclosure. They are also ideal for use in the universal 19-inch equipment racks. Mounted in the desired 19-inch level, they help to ensure optimum air circulation or to conceal unused areas without impairing them.
Digitus Mounting Kit for 482.6 mm (19") and 254 mm (10") Components, M6
User-friendly and quick installation of components in network or server cabinets.
- 50 screws, cage nuts, and washers - Standard size M6 - Compatible with all standard 19-inch or 10-inch perforated panels - PZ screw head - Silver screw, black washer - Ready to use right away: Shipped loose in a cardboard box
The DIGITUS® mounting kit consists of 50 M6 screws, cage nuts, and washers. Your equipment can be easily and securely mounted in a network or server cabinet. Thanks to the convenient snap-in method, the cage nuts can be quickly attached to the 19" rail. The PZ (Pozidriv) screw head ensures user-friendly operation.
Digitus Cable Management Panel with Brush Entries for 483 mm (19") Cabinets, 1U
- Easy installation - Optimized cable management possibilities due to cable rings and additional openings with brushes
The Cable Management Panel is getting fixed on the 483 mm (19”) profile rails. Four cable guiding rings and three cable entries with brush allow an easy, horizontal array of patch cords. It guarantees an optimized cable management in your 483 mm (19”) network- or server rack.
Digitus aluminum outlet strip with pre-fuse, 8 safety outlets, 2 m supply IEC C14 plug
Safe and professional power supply in the 482.6 mm (19") range
- Perfect power source for your 482.6 mm (19") enclosure - Sockets are rotated by 45° for optimum space management and easy access
The DIGITUS® power strips are the perfect solution for your 482.6 mm (19") network or server cabinet. Optimized for cabinet mounting, the DIGITUS® power strips with 220-240V at 50-60 Hz offer you the best performance with a suitable load. The 482.6 mm (19") mounting material supplied ensures optimum attachment to the profile rails of your cabinets. Each socket strip can be mounted horizontally or vertically and, depending on the cabinet type, it is possible to mount the socket strip with the taps facing upwards or downwards.
Digitus Cable brush strip for 483 mm (19") cabinets
- Enables orderly cable routing within the 483 mm (19") network or server enclosure - 27x423 mm opening with brushes to protect the cables from damage - Slim design that only takes up 1 height unit - Ready for immediate use: Fastening material is supplied (cage nuts, screws, washers)
The 1U cable brush strips are attached to the 483 mm (19") profile rails. Integrated brushes protect the routed cables from damage. They are therefore particularly easy to lay in the rear or side of the enclosure to optimize cable management in your network or server enclosure.
Digitus Cable management bracket for 482.6 mm (19") network and server enclosures
Complete set of cable management brackets and mounting screws for flexible cable management.
- The cable management brackets keep your 482.6 mm (19") network or server enclosure tidy. - Make structured cabling flexible. - Angled opening for easy cable entry. - Robust sheet steel with powder coating in gray (RAL 7035) to match the network or server enclosure. - Set of 10 cable management brackets incl. mounting material
The cable management brackets keep your 482.6 mm (19") network or server enclosure tidy. The robust sheet steel construction offers a flexible and optimum solution for structured cabling. The scope of delivery includes 10 cable routing rings and the required fastening material.
483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanized
483 mm (19”) profile rails are adjustable in depth
1-point-locking-mechanism on the front door
Safety class rating IP20
200° door opening angle
Lockable perforated steel front door
Roof is prepared for fan units (punched out entries)
Equipment mounting depth min.-max.: 170-270 mm
Ventilation slots for active and passive ventilation and exhausting
Cable entry with brush strip on the top and with plastic cover on the base
Description
The DIGITUS® Wall Mounting Cabinets are made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany
- Unmounted flat package delivery for cost- and space effciency - Optimized air ventilation and exhaustion - Lockable perforated steel front door ensures safety
The 483 mm (19”) network cabinets for wall installation from the SOHO series are delivered unassembled using a flat pack to optimize costs. Available in four rack units and equipped with a full glass door as well as a cable entry with brushes in the roof and floor, this is the perfect product for subdividing or building up a small to medium-sized network. Two pairs of galvanized 483 mm (19”) profile rails labeled with easy-to-read rack units are installed on the inside. Their depth can be adjusted. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). The door hinges can be switched. Installation takes just a few steps and is extremely easy thanks to the step-by-step instructions included.
Specifications
About this item
About this item
Item No.
331813
EAN
4016032432562
Manufacturer No.
DN-19-12U-S-PD
Specs
No matching specifications found.
Features
Front door key lock
Yes
Front door construction
Steel
International Protection (IP) code
IP20
Key lock
Yes
Frame type
Closed
Type
Wall mounted rack
Material
Steel
Product colour
Light grey
Maximum weight capacity
60 kg
Rack capacity
12U
Side panels included
Yes
Weight & dimensions
Size (imperial)
48.3 cm (19")
Width
540 mm
Depth
400 mm
Height
595 mm
Packaging data
Package weight
18 kg
Package width
630 mm
Package height
190 mm
Package depth
590 mm
Package volume
70623 cm³
Logistics data
Country of origin
China
Harmonized System (HS) code
85381000
UK Trade Tariff code
94032080
Manufacturer Information
GPSR - Product Safety Information
The economic operator based in the EU is responsible for this product
Eine ggf. ausgeschriebene/inbegriffene Garantie/Herstellergarantie wird durch den Hersteller des Produktes gewährt. Die Garantieleistung des Herstellers erstreckt sich räumlich mindestens auf das Land Deutschland. Inbegriffen sind mindestens alle Mängel die innerhalb der Garantiezeit entstehen und nicht von Ihnen verursacht wurden. Die Garantiebedingungen und Kontaktdaten samt der Erfordernisse für die Geltendmachung der Garantie sind auf den Internetseiten der jeweiligen Hersteller einsehbar. Für das aktuelle Produkt finden Sie diese Informationen unter folgendem Link: (www.apple.de). Bitte wenden Sie sich zur Abwicklung der Herstellergarantie an den Garantiegeber. Die gesetzlichen Mängelrechte (Gewährleistungspflicht) gemäß den §§ 437ff. BGB (Nacherfüllung, Rücktritt, Minderung und Schadensersatz) von 24 Monaten werden durch eine zusätzliche Herstellergarantie nicht eingeschränkt. Bei Fragen zu den genauen Bedingungen der Herstellergarantie Ihres Produktes wenden Sie sich bitte an shop2go@continue.de.
General product descriptions contained in brochures, magazines, price lists, on the internet, or in other publications do not constitute an agreement regarding product characteristics or a warranty. This applies in particular to the appearance, dimensions, and weights of the goods. It also applies to specified performance data, insofar as these do not determine suitability for the intended or ordinary use.
Schneller Versand
In 1-3 Werktagen bei Ihnen. Kostenlos ab 50 €.
Sichere Zahlung
SSL-verschlüsselte Datenübertragung. Kauf auf Rechnung, PayPal & Kreditkarte.
